Solutions to some common problems in sand washing working processing

The surface of the artificial sand is coarse, with many edges and corners. The combination between aggregate and cement and aggregate is high, and the mechanical biting force is high. So the strength of artificial sand concrete is higher than that of natural sand. Artificial sand has become the main raw material for construction and highway construction, and the production of artificial sand can not be separated from the machinery equipment of sand and stone processing. Here, talk to you about the sand washing working process used in sand stone production line, and some problems that need to be paid attention to during the use of sand washing machine.

In sand washing machine, sand washing quantity reduced or sand leakage occurred in sand washing machine: sand net damage and sand net fixed bolt fall off. When this is the case, the user needs to pay attention to check and repair or replace the sand net; fasten the bolt. The users also need to pay attention to the vibration of the machine frame of the washing machine, the loosening of the bolt of the connecting frame, and the loosening of the bolt of the bearing seat will cause the vibration of the machine frame of the washing machine. Fasten the bolt; check and fasten the bolt to be solved.

The gear of sand washing machine is easily damaged, which is generally not maintained in time. It will cause this problem if the shaft speed of sand washing machine and speed reducer do not reach the specified parallelism. Elimination method: refuel according to the prescribed time; adjust to make it meet the requirements.