Bubbletank:Information & Application Images

バブルタンク社.製品情報と応用の画像

Aeration booster and AWA aeration System 

2009年03月06日 18時52分55秒 | Weblog

This device increases the amount of dissolved oxygen in the sewage without the need for additional energy sources.
It is therefore quite different from the aeration principle using diffusers.
The best sewage conditions are the same, both in terms of the rate of gas absorption, which dissolves the necessary gaseous components in the air into the sewage, and the rate of gas release, which releases unnecessary air components from the sewage.
The best sewage condition is the thin liquid film of sewage produced in the air reservoir in the AWA device or in the air reservoir in the aeration booster, which is placed in the sewage.

The current aeration systems used in wastewater treatment plants and the bubble towers used in the chemical industry only bubble the desired gaseous components in the liquid.
They are therefore less efficient in replacing unwanted gaseous components already dissolved in the liquid, and naturally less efficient in dissolving the desired gaseous components.

Rupture of the liquid film Click!  https://www.youtube.com/watch?v=LZgD-kvL8iI

 Aeration booster

Click ➽ https://www.youtube.com/watch?v=M9eGhaJIR78

 

Actively generete bubbles  Click!  https://www.youtube.com/watch?v=7Ps6jkJH47Y

   

       

 AWA Aeration System

Behavior video        Click ➽ https://www.youtube.com/watch?v=4ByXpZEuYz0

The video at the URL above shows that the dissolved oxygen in the treatment tank can be increased to values close to 3mg/L by using the AWA Aeration System without increasing the air supply.
In this experiment, the dissolved oxygen increased from 1mg/L to 3mg/L.
Even if the dissolved oxygen in the treatment tank is less than 0.3 mg/L, it can be increased to more than 3 mg/L by replacing the AWA aeration system.

      

By simply catching the air bubbles that rise to the surface in the sewage, the system can increase the amount of dissolved oxygen in the sewage treatment tank.

     

Internal behavior slow video Click   https://www.youtube.com/watch?v=R0R50mFIhpM

  

Click  https://www.env.go.jp/water/asia_business/pdf/R1_earth-creative_en.pdf

             

No matter how small the air component is made into fine bubbles, it cannot be dissolved in saturated water (e.g. tap water) or oversaturated water (e.g. sewage from a sewage treatment plant).

Particularly in oversaturated water, the extra dissolved gaseous components are released into the space inside the microbubbles, causing the microbubbles to expand rapidly and most of them to float due to increased buoyancy.

Click!  https://www.youtube.com/watch?v=KXTroWf0w40

None of the sewage in the sewage treatment plant is in a state of degassing.
It is almost always supersaturated with gaseous components other than oxygen.

 

《Bubbletank image collection》  https://blog.goo.ne.jp/bubbletank/images

Bubbletank 

http://ww52.tiki.ne.jp/~bubbletank/

E-mail bubbletank@mx52.tiki.ne.jp


コメント   この記事についてブログを書く
  • Twitterでシェアする
  • Facebookでシェアする
  • はてなブックマークに追加する
  • LINEでシェアする
« 液膜生成の曝気方法で、DOは0... | トップ | 液膜式曝気:AWA-200 »
最新の画像もっと見る

Weblog」カテゴリの最新記事