Follow this three-step process

2017-07-12 10:45:02 | iks-sh
Follow this three-step process when working with box cutters:
Check the route to make sure it's free of obstructions, water and other trip-and-fall hazards.

Set down the load slowly, bending your knees. Remove protruding objects (that can block walkways) from displays, counters, tables and floor stacks.

Paper Converting Knives Break down empty boxes and containers; discard them promptly so they don't accumulate.

Stack merchandise in a stable manner that's easy to reach.

- Granulator Knife Use boxes, pallets or other items in place of a ladder.

Do not let go until you've lowered it securely onto the floor. It is also important to eliminate obstructions from all the exit paths.

- Never ride a pallet jack or forklift.

Place your feet close to the object, bend your knees and get a firm hand hold.

- Load stock trucks or carts so they pass through aisles or doorways with ease.

Follow these safety rules on your receiving dock:

- Keep the dock area clear of racks, displays and other items or debris.

- Clean any spills or wet areas that can cause a slip-and-fall injury. Don't try to hoist yourself up or jump from the dock to ground level.

Turn your body by changing foot position as you start walking, rather than twisting.

Stack cartons so that they're not piled at the end of aisles where people could trip over them.


Maintain at least 30" of clearance space around all sources of ignition such as heaters, boilers and electrical panels. Position the box at an angle to your body so that the cutter will not be moving directly towards you. Make a smooth cut, then turn the box a quarter revolution. If you operate a retail store or have a similar warehousing arrangement, then take a look at the tips below, they may help you to make your workplace safer and more efficient. Lift straight up, keeping the load close to your body without twisting or turning.


- Stack merchandise in aisles, stairs or in front of exits.

2. aisles, stairs) and keep them free of debris, trash, spills or fallen merchandise. Position your other hand on the opposite side of the carton.

Place floor mats and carpets flat, without ripples or curled edges, and make sure they are slide-resistant.

These are simple safety tips but if they are strictly followed, then your shipping, receiving and warehousing areas will be as safe and as accident-free as possible. Transport carts and wheel racks by pushing-not pulling. Clean all walkways (floors.

- Overreach when stocking. Dull blades require more pressure and increase the risk of injuries.

- Check all pallet jacks before use.

- Use stock trucks or carts whenever possible.

Tips for proper lifting:

Size up the load.

Check the condition of a box cutter's blade frequently.

Lift smoothly, primarily using your leg muscles.

. If it looks too heavy, use lifting equipment or ask for help.

- Use the stairs to go from ground level to the dock, or vice versa.
Simple precautions and correct procedures can make the difference in preventing accidents in the shipping and receiving department of a retail store. Make another smooth cut, then turn the box again. Stretching may result in falls or strains.

Do's and don'ts of safe stocking in shipping and receiving:


- Lay pallets flat
コメント   この記事についてブログを書く
« Global Exchange launched th... | トップ | The police indicate this in... »




この記事のトラックバック  Ping-URL
  • 30日以上前の記事に対するトラックバックは受け取らないよう設定されております。
  • 送信元の記事内容が半角英数のみのトラックバックは受け取らないよう設定されております。
  • このブログへのリンクがない記事からのトラックバックは受け取らないよう設定されております。
  • ※ブログ管理者のみ、編集画面で設定の変更が可能です。