ライフ、健康

元気で幸せで暮らすため いい生活習慣を身に付けまましょう

Proper operation of the tow rope and wheel chock

2016-10-19 10:36:43 | 高齢社会
1. Locate the trailer hitch in the rear of the tow rope and in front of the towed vehicle. Many car trailer hook position design in the lower bumper, usually in the vehicle manual marked a clear location, the owner can also be observed by the front and rear bumper found there is hidden space, where the use of circular or square cover covered Location is where the car trailer hook position.
2. Some of the car's trailer hook is split, need to be assembled in use. After removing the cover from the bumper, assemble the carrying hook.
3. Install the trailer tool. Whether the choice of soft or hard trailer tools, installation must ensure that the connection when the car linked to a solid and reliable, towing hook design on the need to lock the security lock in place. Check the front and rear connections again before running the trailer. Soft trailers with no tow hooks at both ends are used to tie loose knots, which can be difficult to unlock if the knuckle is pulled through a great traction.
4. Tractor start with a block, to ensure adequate torque to provide adequate traction, while tractors need to control the speed and maintain a smooth driving, when a little resistance to increase when the power output. Manual models to avoid fierce lift clutch pedal, a semi-joint slow start, so as not to cause damage to the car.
Conventional automotive wheel chocks are composed of two sets of tapered roller bearings or ball bearings combined, bearing the installation, oiling, sealing and clearance adjustment are carried out in the automotive production line. This structure makes it difficult to assemble in the automobile manufacturing plant, high cost, poor reliability, and maintenance of vehicle maintenance point, you also need to clean the bearing, oil and adjustment.
Wheel bearing unit is in the standard angular contact ball bearings and tapered roller bearings developed on the basis of it will be two sets of bearings as a whole, with the assembly of good performance, can be omitted clearance adjustment, light weight, compact structure, load capacity Large, sealed bearings can be pre-loaded with grease, omit the external wheel hub sealing and maintenance-free advantages, has been widely used in cars, in the truck also gradually expand the application trend.
ジャンル:
ウェブログ
コメント   この記事についてブログを書く
この記事をはてなブックマークに追加
« Cleaning the Evaporator Coi... | トップ | Electric Closed Circulation... »
最近の画像もっと見る

コメントを投稿


コメント利用規約に同意の上コメント投稿を行ってください。

数字4桁を入力し、投稿ボタンを押してください。

あわせて読む

トラックバック

この記事のトラックバック  Ping-URL
  • 30日以上前の記事に対するトラックバックは受け取らないよう設定されております。
  • 送信元の記事内容が半角英数のみのトラックバックは受け取らないよう設定されております。
  • このブログへのリンクがない記事からのトラックバックは受け取らないよう設定されております。
  • ※ブログ管理者のみ、編集画面で設定の変更が可能です。